Travelling to Japan: eSIM set-up checklist before you fly
Setting up an eSIM for Japan is simple—if you follow the right steps in the right order. This checklist walks you through everything from home, before your flight, to the moment you land in Tokyo, Osaka or Kyoto. It applies to NeoSIM’s APAC plans (including the Neo Asia · 7 Days and Neo Asia · 30 Days), which cover Japan and 13 other places across Asia—but not mainland China or Singapore.
✅ Before departure: phone readiness
- Confirm eSIM support: Check your phone model’s official specs—most iPhones from iPhone XS/iPhone XR onward, and many Android models from 2020 onward support eSIM. Older or carrier-branded phones may not.
- Ensure carrier unlock: Your phone must be unlocked by your home carrier. If it’s locked to a specific network, the eSIM won’t activate—even if the hardware supports it. Contact your carrier to verify or request unlock if needed.
- Update software: Make sure your device runs the latest OS version. Outdated software can block eSIM installation or cause activation errors.
✅ At home: install and configure
- Install over Wi-Fi only: Use a stable home or office Wi-Fi connection—not cellular data—to scan the QR code and install the eSIM. Cellular data cannot be used for installation.
- Name the line clearly: During setup, label the eSIM with a recognizable name like “Japan eSIM” or “Neo Asia”. This avoids confusion later when toggling between lines.
- Do not activate yet: Installation ≠ activation. The eSIM stays inactive until you land and manually enable it. No need to switch lines or turn on roaming before departure.
✅ After landing in Japan
- Turn on Data Roaming: Go to Settings > Mobile/Cellular > Data Roaming and toggle it ON—but only for the eSIM line (not your home SIM). This step is required for data to work.
- Select the eSIM for data: In Mobile/Cellular settings, choose the named eSIM line as the default for cellular data. Your home SIM can remain active for calls/SMS if needed, but data must route through the eSIM.
- Wait for automatic registration: Once landed and Data Roaming is on, your device should connect within 1–3 minutes. No manual network selection is needed—Japanese networks auto-register.
⚠️ If there’s no connection
- Restart your phone: A full reboot often resolves temporary registration failures.
- Double-check Data Roaming: Confirm it’s enabled *only* for the eSIM line—not the physical SIM.
- Verify the correct line is selected for data: Go back into Mobile/Cellular settings and ensure the eSIM (e.g., “Japan eSIM”) is set as the data line.
- Check coverage note: NeoSIM’s APAC plans work across Japan—including urban areas like Tokyo, Osaka and Kyoto—as well as 13 other Asian locations (Bangladesh, Hong Kong, Indonesia, India, Cambodia, South Korea, Laos, Macao, Malaysia, the Philippines, Thailand, Taiwan, Vietnam). They do *not* cover mainland China or Singapore.
📲 Final reminder
Your eSIM is delivered instantly after payment via the Telegram bot @genesimhk_bot. You’ll receive a QR code and step-by-step installation instructions directly in the chat—no email, no account login, no app download required.
| Plan | Price | Daily allowance | Duration |
|---|---|---|---|
| Neo Asia · 7 Days | $24.99 | 2 GB at full speed, then 1 Mbps | 7 days |
| Neo Asia · 30 Days | $49.99 | 1 GB at full speed, then 1 Mbps | 30 days |
Both plans offer unlimited daily data—just with a speed reduction after the high-speed allowance is used. No top-ups or hidden fees. Data only: no local phone number, calls or SMS included.
Get your NeoSIM eSIM
Pick a plan in the Telegram bot: the eSIM QR arrives in the chat about a minute after payment.